How to Store a Snow Plow in Less Than 60 Minutes

Reading Time: 3 minutes

Your snow plow is a lifesaving device during the winter months, but it can become a hindrance once spring sun prevails. Whether you use the plow for personal or professional use, it’s always a good idea to know how to store it the right way. Follow these steps that allow you to store a plow in less than 60 minutes.

1. Begin With a Good Cleaning

Storing a snow plow starts with a thorough cleaning. It may be pushing snow most of the winter, but it does end up with other particles attached to it.

Follow these steps during your cleaning process, such as:

  • Wiping the plow down with a rag and warm, soapy water
  • Rinsing the plow with a gentle stream

A good, hand washing is all it takes.

2. Survey the Plow for Damages

A clean, snow plow is easy to inspect. Take this time to really look for any damages that have arisen over the season.

Damages might include:

  • Leaky hydraulics
  • Bulges
  • Cracks
  • Headlight anomalies

Fix your Fisher snow plow now. There’s ample time to complete the work. During next winter, you might be in a hurry to use the tool. Damages will only hold you back.

3. Pallet it Up

It’s always a smart idea to be productive during any project. With this fact in mind, look for a solid pallet to use as a base for your plow.

Disconnect the plow from your vehicle. Allow it to rest on the pallet. The pallet makes it easier to move the plow around so that storage is a snap.

4. Pay Attention to Connectors

Snow plows and vehicles will now have a lot of exposed connectors. Cap them with their respective covers. If they aren’t available, use dielectric grease in order to fill in the openings.

Rust and debris can quickly damage the connectors if they’re left open to the elements. Take the time to complete this task.

5. Try Touch-Ups Now

You’ve gone over the plow for potential damages, but now it’s time to look carefully at any paint issues. Look for any rusty areas that have developed during the season. Remove any rust from the snow plows by running wire brushes over the areas.

Add touch-up paint to the exposed sections. Your efforts pay off with a plow that looks practically brand new in the fall.

6. Lubricate Moving Parts

Apply lithium grease to these moving parts before storing a snow plow:

  • Hinges
  • Pins
  • Joints
  • Non-painted hydraulic-cylinder sections

Although you’ve cleaned the plow, moisture will still be a threat to moving parts. The grease gives the parts a layer of protection against rust, mildew and freezing up entirely. If you find a part that has a movable element, apply grease just in case.

7. Release Spring Tension

The springs on your snow plow are often overlooked. They simply keep up their tension whether the plow is in use or not. Stop this neglectful cycle because the springs will only have a short lifespan in the end.

Loosen the springs so that they’re still coiled or engaged. They don’t have to be completely loose. Reengage the springs in the fall when you prep the plow for the new season.

8. Document and Lock it Up

Snow plows are expensive items, and thieves understand this fact. Record any serial numbers noted on the plow. Be sure to lock the plow with a sturdy padlock. Ideally, the plow should be out of sight so that no one is tempted to vandalize or take it.

Storing your plow in less than 60 minutes can include strategic safety so that it’s ready to serve you the moment snow threatens the area in the fall or winter.